One of my favorite Halloween traditions is making a small treat for my teammates. This year, I created the Witch Boot Treat Box (SVG) and filled it with a popular Halloween candy. Its simple design makes it ideal for adding some playful witchy decorations.
This file includes four box sides, one box bottom, two boot covers, and four boot lace covers. For the box sides and bottom, all tabs are folded in a mountain fold. The box sides are attached side by side, alternating wide and narrow sides, until all four sides are connected. Attach the bottom of the box to its narrow end, then secure the wide side tab to the corresponding wide box side. Once the first tab is secured, move on to the next, gluing the remaining tabs to the bottom of the box.
With the bottom of the box in place, add glue to the final side and close it up. To secure the long tab, use the handle of a paper tool to press from inside the box against the tab.
The straight edge of the boot lace cover lines up with the straight edge at the front of the boot. The boot cover is then attached to one wide side of the box, with the box opening positioned at the top. Follow the same steps for the other side of the boot.
The treat box is now prepped for some witchy charm. I punched holes and threaded ribbon through the front of the boot, added quirky black stars, and topped it off with a trick-or-treat tag (
SVG,
Silhouette).
This adorable treat box is all set to be filled and shared with my team. If you have any questions, feel free to leave them in the comments. Thanks for joining us today!
Brandie
.jpg)
